• send
Rolled metal from warehouse and on order
AZOVPROMSTAL
We offer the best steel prices
+38 (098) 875-40-48
Азовпромсталь
  • Sheet steel in Mariupol, Dnipro and Kiev

    There are more than 2000 tons of sheet products in the company's warehouse. Various grades of steel, including st45, 65G, 10HSND, 09G2S, 40X, 30HGSA and foreign analogues S690QL, S355, A514, etc.
  • Steel rental on

    In the shortest possible time, we will produce any quantity of sheet steel of specified dimensions

Composite tiles - modern metal tiles

Композитная черепица – современная металлочерепица

Composite roofing tiles have a second name - modern metal tiles. This roofing material was invented in 1956 in New Zealand.

The metal tile was covered with several different protective layers, artificially combining all of them into one composite.

Composition of composite layers

A thin sheet of steel (0.45-0.5 mm) is coated on both sides with aluzinc (Al≈55%, Zn≈43.4%, Cr≈1.6%), then with a 2 micron primer. A thick layer (200 microns) of acrylic resin is applied to the outside on top of the primer (ground), on which different-fraction stone chips are fixed. Finishing outer layer - acrylic glaze, additionally fixes the colored dressing from shedding and gives shine to the shingles. Application of each layer is accompanied by high temperature drying.

Aluzinc alloy protects steel sheet up to 6 times better than simple zinc plating.

Depending on the manufacturer, the components vary slightly, the price of the finished product depends on the quality of the components.

Application and advantages of roofing from improved metal roofing

composite shingles are suitable for replacing roofing without dismantling the old roof - re-roofing;

suitable for pitched roofs with a slope of 12º to 90º;

the color of the roof is determined by painted stone chips according to the German RAL color standard;

the roof is silent, high noise absorption is provided by stone granules;

fire safety of a class "A" roof;

easy installation, fastening of shingles - on anodized roofing nails;

weight of 1m²≈6.5kg, 2.5 times lighter than flexible bituminous roofing, 5 times less than ceramic;

water absorption = 0;

bends and cuts well;

tolerates temperature changes without loss of quality;

no danger of avalanche snow from the roof;

minimum amount of waste during installation;

long service life is confirmed by the manufacturer's warranty obligations.

The under-roof space needs sufficient ventilation during installation, because the roof made of composite tiles is water and vapor tight.

It is possible to select and buy composite tiles of foreign and domestic manufacturers on diana.kiev.ua together with additional elements and fasteners .



Азовпромсталь