A well is a drilled hole in the ground used to satisfy the production of water, other fluids (oil), or gases. Geotechnical wells are also used for mineral exploration, verification of temperature measurements, underground storage, installation of supports or installation of underground utilities.
Artesian well drilling http://www.ukrnadra.com/ - popular the method of highly qualified drilling operations used in the creation of wells of the same name for the extraction of water from limestone interlayers. The mechanisms and methods of drilling operations depend on the characteristics of special equipment, geological conditions and the purpose of the well. For drilling operations, stationary and small-sized rigs are used, which make it possible to create wells with a depth of 30 to 300 meters, the service life of which is limited to about five decades.
Experts recommend small-sized installations that allow professional drilling in hard-to-reach places, significantly reducing the cost and preserving the landscape design. Potential customers are discouraged by the high cost. The deeper the well is planned to be drilled, the higher its cost will be, therefore, for domestic purposes, drilling to a depth of 50 meters is popular.
Artesian water extraction is the only available water supply method in numerous regions. The volume of water produced depends on the type of well, but is limited to about a couple of cubic meters per hour. At the drilling stage, investments are required, the payback of which will become available years after the start of operation.
