Laminate is a floor covering that is created on the basis of fiberboard. The material has a fairly high density. It is resistant to various mechanical damages. Today buy tarkett laminate , for example, on one of the specialized sites. Models are often produced with a special connection system. Thanks to them, the panels are securely attached to the base.
Key recommendations
- The surface in the room must be dry and hard. Any existing irregularities on the floor must be removed.
- If you intend to lay on concrete, then you should use polyethylene for vapor barrier.
- Place a sound-absorbing underlay on the floor beforehand.
Installation process
Before you start laying the material, you should place it in the room for which it was purchased. The laminate should stay indoors for about 48 hours. This is done so that the material adapts to the microclimate of the room. The first panels are grooved against the wall. The last element will need to be trimmed. In this case, there should be a gap at the partition.
The second row should be started with the trimmed part of the panel of the first line of laid elements. Elements at a certain angle are stacked at the previous parts. The panels must be inserted into the locks and snapped into place. Make sure that the spacer wedges are not misaligned. Usually, a clamp is used to install the last element against the wall. When laying, consider the placement of pipes and other objects in the room. You may need to work around them.
Finally, the floor is finished with skirting boards. These elements are selected for the shade of the coating (this can be tarkett laminate ) and doors. A single-level corner threshold is usually installed. They can also lay edging, which levels out the difference in level. Before proceeding with the installation work, it should be noted that the laminate must not be laid in a room with high humidity. It is not allowed to mount the coating on dry cement screed. If the laminate is installed on underfloor heating, then only special types of laminate should be used that are specifically designed for such systems.
