Due to their functionality, reliability and simplicity of design, combined press shears (CPN) are in demand from a wide variety of enterprises. This pressing equipment is actively used in many industrial enterprises, including machine-building.
Combined shears can be used to work with all types of rolled metal and scrap metal. They make it possible to cut a metal workpiece into separate parts, doing it as economically and efficiently as possible.
An important advantage of the CPN is a wide range of models. So, some models work with sheets of small thickness (10-32 mm), others are used for processing rolled metal with a side of 32 - 65 mm. At the same time, the number of working strokes per minute can be measured in tens, which guarantees high productivity. Also, the user can select the pressing equipment depending on the manufacturer. The most famous brands here are metso lindemann, lollini.
When processing rolled metal or scrap metal, there is one very important nuance - the operator must constantly monitor that the knives do not go too deep into the workpiece. Such an oversight can result in a double cut, especially for preheated workpieces. Also, this applies to metal products with high ductility.
In general, the speed at which knives are introduced into the workpiece has a serious impact on the quality of the finished product. So, alloy steels are cut at higher speeds, carbon steels - at low speeds. For this, modern CPNs are equipped with electric motors that can maintain two speeds, which allows you to select the desired "pace" of work.
There are 3 main types of CIT:
• disc, lever (manual);
• container;
• hydraulic.
Hand-held models are great for working with sheets, fittings, corners. They are equipped with two knives that are attached to the bed. Scissors material - tool steel. Circular shears are considered to be more functional and efficient.
Container (horizontal) press-shears are equipped with a special chamber in which metalworking is carried out. This design prevents chips from flying around.
The most productive are hydraulic models. Here, the main task is performed by hydraulic cylinders, so the working force of this equipment is very high. Such loads often lead to problems, however, today you can easily find and buy hydraulic cylinders, eliminating this drawback and repairing the shear press.
Combined press shears (CPN)
|
Azovpromstal® 1 October 2016 г. 13:51 |
Subscribe to news
Metallurgy news
- Today
10:21 Indian metallurgy may face obstacles in raw material supply - 01 May 2024
10:11 US stainless steel prices continue to rise - 29 April 2024
10:57 EU steel industry faces supply and demand challenges - 12 April 2024
09:52 EU steel demand to recover in 2025 - Worldsteel - 05 April 2024
12:40 Liberty's European division is headquartered in Vienna - 01 April 2024
12:51 The number of electric vehicles in Kazakhstan has increased ninefold over the year 12:37 Liberty Czestochowa is preparing to resume production - 27 March 2024
11:38 Ferrexpo faced restrictions on the corporate rights of Ukrainian subsidiaries
Publications
06.05 Selection of food for cats and dogs 04.05 Bituminous shingles in the EuroRoof online store 03.05 The best price of a stretch ceiling per m2 with work in Kyiv from the manufacturer Demi-Lune 02.05 Protein in the HealthFit online store 02.05 I-beams of European standards