3D wax printing is considered a real breakthrough in the field of modern science and industry. Using this technology, it is possible to obtain parts, jewelry, spare parts and forms of the most varied levels of complexity.
Wax seal and its features
Any paraffin-based composition has a minimum printing temperature, as a rule, does not exceed 70 degrees. The wax is used to make molds for parts, spare parts or jewelry. A significant advantage of this material is the ease of removing the formed film from the final product. 3D-printing from wax makes it possible to produce the most accurate molds for casting jewelry. Also, with the help of this material, it is possible to obtain an identical prototype of the decoration in order to work out all the nuances of further processing on it. After receiving the original model, the wax prototype is sent to be melted down, after which it can be reused to make other molds or prototypes.
Advantages of wax seal
The most significant advantages of the wax seal include the following positive points:
• Rational cost of material;
• Sufficient strength of the resulting prototype;
• Plasticity of the material and ease of processing;
• There are no problems with removing the film from the finished product.
When using 3D printers for wax printing, it is highly recommended to strictly follow the rules and requirements for storing finished wax products. Since if the temperature or humidity conditions are not observed, the wax product may deform and lose its original properties.
Scope
Modern 3D wax printing has found a wide area of direct use. Such a seal is actively used in jewelry activities; with the help of wax, a jeweler can hone his skills and craftsmanship without prejudice to precious metals. This type of printing is also used in modern industry, for example, to create casting molds for parts and spare parts with complex design features.
