In order to reveal hidden structural, construction or operational defects in buildings, you will need thermal imaging survey services . Thermal imaging is a method of non-destructive detection of all such defects. It is used to assess the thermal protection of a room, correctly carried out installation work of protective structures, as well as the state of power grids and heating equipment (pipelines and various types of boilers).
After a full survey, a technical report is drawn up, a database of thermograms is also compiled, an energy passport is developed, an energy efficiency class is assigned. The need to issue an energy passport is due to the relevant legislative acts and is mandatory. In addition, the thermal imaging survey provides for a selective analysis of the air exchange rate.
In order for the analysis to be more indicative, the taken multiplicity indicators should be compared with the results of thermal imaging. The level of air passed by the enclosing structures affects not only the ventilation system of the room and the thermal balance, but also the durability of all structures, as well as indicators of the level of energy efficiency of the building. Therefore, in accordance with GOST, before putting the building into operation, it is imperative to check the frequency of air exchange in several rooms.
After the end of all procedures, the information is summarized, on the basis of it, recommendations are then developed for the effective elimination of defects and violations identified during the examination.