A preventive measure to exclude unauthorized opening of the premises, metering devices for the consumption of electricity or water, packaging of cargo, as well as a container for transportation, is the so-called sealing procedure. A “broken” seal is a direct confirmation of penetration and is the basis for taking appropriate administrative, economic or internal disciplinary measures.
The most common are lead seals with an individual (used only by the organization that installed it or by the owner) imprint for which special lead seals are used manual operation (the device resembles wire cutters or pliers).
Criteria for impression
You can order an individual impression for the sealant at the company that sells these devices. The customer needs to know that engraving can be:
- Double-sided - the seal will be read from both sides.
- One-sided - only one side of the print will be visible.
In this case, the first option is considered preferable, because it is quite difficult to fake. The complexity of the applied symbolism depends on the selected diameter of the lead seal, which are of 2 types:
- Compact 5 mm - used for installation on metering devices and various equipment, the print can be no more than 2 characters.
- Standard 10 mm - used for sealing doors, gates, packing goods and containers. The print can have up to 12 characters.
You can get more detailed information and order an individual impression on the sealant using the website of the company that supplies this equipment to the domestic market.
