Metal tiles are the most common roofing material. The metal tile perfectly protects the house from rain and wind. Another plus is the lightness of the sheets, which makes construction easier. The main advantage is still the low price.
Metal tiles are zinc-coated sheet steel. Zinc is needed to protect the metal from corrosion. Galvanized steel sheets are first passivated and then primed. Acrylic paint is applied to the inside of the sheet, and a special polymer coating is applied to the outside.
Polyester is often used as a covering. Polyester additionally protects the surface from mechanical and chemical influences. If, under some conditions, the coating is damaged, you can use a special paint. It, of course, will not replace the factory coating, but it will still protect the roof from moisture.
Metal tiles can be produced in different forms: waves, scales, sometimes you can find sheets with a corrugated surface. Installation technology may differ from the shape of the sheet. In addition to a variety of shapes, metal tile has a huge palette of colors and shades.
Installation of metal tiles should be done carefully so as not to damage the coating. To install such a roof, you need to purchase special shoes with a soft felt soles that will not leave scratches.
Metal tiles should not be cut with devices that can spark a spark, damaging the coating. To cut the sheets, you can use special metal scissors, a jigsaw or a regular hacksaw. For fastening the sheets, ordinary self-tapping screws are used; in addition, you need to purchase a special seal for them.
Before installing the sheets, you need to nail the cornice strip along the entire roof overhang. The bar will serve as a guide. Tile sheets start from the bottom right corner. Sheets can be installed along the eaves, from bottom to top, even in a checkerboard pattern.
The first sheet should be installed 2 centimeters below the bar. The sheets are screwed in with self-tapping screws, which are screwed into the wave deflection. There are 8 self-tapping screws per 1 square meter. During installation, the cornice should form a right angle with the line of the sheet axis.
Installation of metal tiles is very simple, you can handle it even alone. As a result, you can get an excellent roof that will last a long time and will protect from all natural phenomena.
You can buy metal tiles on the website https://kt-stal.com.ua/kiev/metallocherepica-i-komplektuyushhie .
