Regular replacement of the lubricant in the engine is standard procedure. After a certain mileage, the lubricant loses most of its physical capabilities. In its structure, the smallest abrasive gradually accumulates, which the filter element cannot cope with. Timely and correct replacement will help extend the normal life of your powertrain.
Flushing oil properties
If you just drain the waste and pour fresh synthetic or mineral oil instead, a certain amount of abrasive will remain in the engine channels. He will negatively affect the moving parts of the power unit. If you choose to flush on the Oilavto.com/"> Oilavto.com website and pour it into the engine before filling it with fresh lubricant, you can expect the following result:
- Dissolving deposits formed by the natural properties of engine oil.
- Flushing the most difficult-to-reach canals from all contamination.
- Flushing fluid cleans seals, extending normal life.
- Liquefies residual oil so that it is completely drained from the crankcase.
Important: flushing, used immediately after removing old liquid motor lubricant. The engine should run at idle speed for 5-10 minutes. Draining must be carried out immediately to get rid of all dirt from the crankcase.
When is it necessary to use a cleaner
The vehicle manufacturer recommends that this operation be performed every time the vehicle is serviced again. Professionals insist on the mandatory use of the useful properties of the wash if one of the following situations occurs:
- significant overheating of the power unit with boiling of the coolant;
- the use of two or more types of engine oils for forced reasons;
- when buying a car from the secondary market, for preventive cleaning of the engine;
- if damage was noticed when the oil filter was replaced.
In all these cases, flushing oil will clean the engine from numerous varnish and tar deposits. Clean the pressure lubrication channels to the most important parts of the power unit. Prepare the motor for subsequent normal operation.
Consequences of using a wash
The effect is especially noticeable if the driver has not previously used a special fluid for additional cleaning of the power unit. After a good cleaning, a return to the normal pressure in the oil line is observed. The engine runs quieter and smoother at all speeds. Resists increased stress easily
