• send
Rolled metal from warehouse and on order
AZOVPROMSTAL
We offer the best steel prices
+38 (098) 875-40-48
Азовпромсталь
  • Sheet steel in Mariupol, Dnipro and Kiev

    There are more than 2000 tons of sheet products in the company's warehouse. Various grades of steel, including st45, 65G, 10HSND, 09G2S, 40X, 30HGSA and foreign analogues S690QL, S355, A514, etc.
  • Steel rental on

    In the shortest possible time, we will produce any quantity of sheet steel of specified dimensions

The difference between chipboard, fiberboard, MDF materials

Разница между материалами ДСП, ДВП, МДФ

Among a wide range of construction and installation products, some are especially popular due to their versatility. The popular board materials - chipboard, fiberboard, MDF can serve as an example. But what a fundamental difference is hidden behind the abbreviations that are incomprehensible at first glance. Can't they replace each other under equal conditions of use.

Popular MDF

The composite material is primarily distinguished by the high quality of used wood chips and binder. The slab is formed under the influence of high temperature and significant pressure. As a result, it has the following performance indicators in practice:

  1. Creation of furniture and other items of complex configuration.
  2. Strong and durable in normal use.
  3. Wide range of sheet thicknesses, from 2 to 66 mm.
  4. Virtually immune to pest damage.
  5. Good resistance to high temperatures.

Important: the only drawback is that the panel cannot resist high humidity for a long time. It is for this reason that it should not be used outdoors.

Time-tested chipboard

Like the previous material, it is made on the basis of shavings of a wide variety of wood species. The adhesive is a non-mineral based adhesive. The material in demand in construction has its advantages in practice:

  • relatively affordable cost per sheet;
  • there are classic and moisture resistant slabs;
  • screws and nails hold firmly to the base of the material;
  • easy to handle with standard woodcutting tools;
  • fairly stable mechanical strength.

Important: during operation, the board can release volatile ingredients of resin binders. They are carcinogenic in high concentration. It is for this reason that there are restrictions on use in furniture.

Simple and inexpensive fiberboard

The cheapest and unclaimed small shavings and plant fibers are used as a basis. The sheet is formed under high pressure and medium temperature using a small amount of binder. The consumer can buy djerelo.biz one of six soft and nine hard fiberboard analogs. It is used in lightly loaded elements of wooden structures, including furniture.



Азовпромсталь