An increase in traffic intensity on roads and an increase in the number of vehicles requires a new technological approach, reconstruction and refurbishment of gas stations, for more details see https://petrometal .com.pt /rekonstrukcziya-azs ..
Gas station design and functions
Most petrol stations are built in a similar way, with most of the petrol station underground, petrol stations in the front yard of the ground deck, and a service point inside the building. One or more fuel tanks are usually located underground. Underground tanks are made of special steel double-walled and coated with polyurethane paint. This technologist provides a tank for oil products:
1. Durability;
2. Reliability;
3. Security.
Local regulations and environmental concerns may necessitate a different method where stations store their fuel in surface tanks.
Usually, fuel is unloaded from a tanker truck to tanks through a separate valve located at the perimeter of the gas station. Fuel from the tanks goes to the dispensers through underground pipes. Each fuel tank must be directly accessible at all times.
Distribution system and environmental safety
Older stations tend to use a separate pipe for each fuel and for each dispenser. New stations can use one pipe for each dispenser. This tube contains several smaller tubes for individual fuels. Fuel tanks, dispensers and nozzles used to fill tank trucks use vapor recovery systems that prevent steam from being released to the atmosphere through a piping system. The exhaust is positioned as high as possible. A vapor recovery system can be used in the exhaust pipe.
The ground-based main part of the gas station is intended for refueling vehicles. Fuel dispensers are placed on concrete baseboards due to safety precautions. There must be a drainage system in the area around the fuel rail. As fuel is sometimes spilled on the ground. Any liquids present on the site will go down the drain to filter out any contaminants to prevent them from entering the soil.
