OWEN TPM500 thermostat and TPM501 relay-regulator are used in industry to regulate temperature and other parameters. OWEN devices are easy-to-use and are used in heat presses, heat-shrink equipment, and dryers.
OWEN thermostat TRM500 used in thermopresses (used for thermal transfer), heat shrink equipment, dryers, homogenizers, equipment required in the manufacture of building materials, extruders and various techniques that require temperature control.
Key functionality:
- Automatic PID tuning available.
There are several exits for control:
- Output one: electromagnetic relay. On /off or PID based control;
- Second output: repeats the work of the first output, used to control solid-state relays, (0 ... 5V);
- Third output: electromagnetic relay (5A). Output for signaling critical temperatures.
The simple configuration of the TPM500 is expressed in the division of the thermostat settings menu into two parts:
- Quick setup options;
- Full customization options.
The powerful output makes it possible to switch resistive loads up to 30A. Increased sizes of indicator symbols (symbol height 20mm); The external button is used to change the temperature and transfer to the manual control mode; It is possible to stop or start maintaining the temperature using an external button; The alarm is triggered when a critical temperature value is reached; The device has the necessary set of functions, the set allows you to regulate electric heaters.
- The thermostat is ergonomic, has a modern design, a clear, simple interface.
- TPM500 application temperature: -20 ... + 50 С
- The degree of accuracy of the device is 0.5 /0.25.
- The connection of the technical device is carried out in a 2-, 3-, 4-wire scheme.
- The temperature is controlled by a PID controller or an on /off controller.
- Temperature measurement is carried out thanks to the most popular sensors in the Russian Federation (thermocouples and RTDs).
Another device from the ARIES line TRM501 is light in operation and adjustment, relay-regulator with a built-in timer. The regulator is equipped with two output relays, one of which controls the measured parameter, and the other provides signaling of an alarm or the end of the process.
An additional discrete input can be remotely controlled by the device.
List
