• send
Rolled metal from warehouse and on order
AZOVPROMSTAL
We offer the best steel prices
+38 (098) 875-40-48
Азовпромсталь
  • Sheet steel in Mariupol, Dnipro and Kiev

    There are more than 2000 tons of sheet products in the company's warehouse. Various grades of steel, including st45, 65G, 10HSND, 09G2S, 40X, 30HGSA and foreign analogues S690QL, S355, A514, etc.
  • Steel rental on

    In the shortest possible time, we will produce any quantity of sheet steel of specified dimensions

Scope of application of mineral motor oils

Сфера применения минеральных моторных масел

A wide range of lubricants minimizes the negative effects of friction between two metal surfaces. This is especially important for engines. High-quality and affordable mineralnoe-motornoe-oil">mineral oil is in demand not only in cars, but also in industrial mechanisms. Quite versatile, it is widely used in mechanical transmissions.

Technological features of production

Oil is always the basis. At the refinery, raw materials go through several stages of processing. One of the products is the base mineral oil, from which products for engines are subsequently produced. It is worth adding to the most important and responsible technological processes:

  1. Purification of the base product from suspended impurities.
  2. Getting rid of a lot of natural paraffins.
  3. Addition of necessary additives, additional components.
  4. Check for compliance with all specifications.
  5. Developed and stored in a specially adapted container.

Important: high-quality mineral motor oil has a limited shelf life. With prolonged storage, even under optimal storage conditions, the lubricant loses some of its performance characteristics. To lubricate the engine, it is better to use a fresh product from a trusted manufacturer.

Actual Application

Mineral oil has stable performance. But, due to the use of natural raw materials in the production, it can only be used for a limited range of internal combustion engines. The main advantage of lubrication is affordable cost and minimal natural aging inside the engine. Engine oil is recommended for the following areas:

  • motors with a production date before 2001;
  • simple naturally aspirated engines with a carburetor;
  • motor with solid mileage and large clearances;
  • for commercial tractor transport;
  • recommended by some truck manufacturer.

After a major overhaul, while the engine has minimal clearances between moving parts, it is better to use semi-synthetic oil. It takes better care that the motor does not get damaged due to overloads and overheating. But, as natural wear and tear, in order to save money, you can switch back to the mineral counterpart.



Азовпромсталь